meta data for this page
Sensor Readout
Funktion
The Sensor Readout board was designed to amplify and filter the signal from different seismometers and accelerometers.
It has two inputs to be able to work with differential signals from two bnc cables.
Optionen und Alternativen
to amplify and filter signals
Performance
Datum
Beginn des Projekts: Februar 2017
Status
Prototyp is working Aufwand für Nachbau: ask me
Entwickler
Henning Albers, albers@iqo.uni-hannover.de
Anwender
ATLAS
Schaltungsprinzip
The board is equipted with two amplifier stages and two filter stages.
After combining the differential signals there is the first amplifying stage. It can be chosen between amplifications between 0.1 and 1000.
Then there are the two filter stages. These are realised on a additional small pcb. The filter board is designed to be used as a high or low pass filter of second order in a Sallan-Key configuration.
After the filters we have a last amplification stage like the first one.
In the end there is a lowpass fliter to match the Nyquist frequency to a ADC.
Schaltplan
- Der Schaltplan im PDF-Format
- Die Source des Schaltplans ist auf der Download-Seite des Wiki abgelegt.
Layout
- Abmessungen der Leiterplatte:
- Versorgung: +-18V, GND
- Eingang: max +-10V
- Ausgang: max +-10V
- Anzeigen: no
- Der Bestückungsdruck: sensor-readout_layout.pdf
- Die Bestückungsliste: sensor-readout_bom.pdf, sensor-readout_bom.xls
- Die gezippten Gerberdaten für die Bestellung der Platine
- Die Source des Layouts im pcb-Format liegt auf der Download-Seite des Wiki.
Gehäuse
Test
Bedienung
Bilder
Kalkulation
was | wieviel | E-Preis | Preis | Anmerkung |
---|---|---|---|---|
Leiterplatte | 1x | ??.?? € | € | 1/n von XXX EUR |
Gehäuse | 1x | ??.?? € | € | |
* | ?x | ??.?? € | € | … |
R,C | ??x | 0.02 € | € | Bauform 0805 |
Bestückung | ??.00 € | bei SRM | ||
Verschnitt | ?.?? € | |||
Summe | € |
Meckerliste
Was für die nächste Version zu tun ist: (: verworfen, : in Arbeit, : im Schaltplan, aber noch nicht im Layout, : erledigt)