meta data for this page
This is an old revision of the document!
PD_QAI_MOT
Funktion
A simply PD amplifier PCB.
Versions
There is a mirrored version!
There is a “version 2.0” that is not yet very much tested (09.2021).
There is an AutoCAD file for a stray-light protection.
Date
Start of the project: April 2020
Status
Is used in the QAI detection MOT. Works so far.
Author
Martin Quensen, quensen@iqo.uni-hannover.de
Idea
Version 2: A single transimpedance amplifier (OPA656), and a place to glue a 10mm x 10mm PD onto. SMA connection, PSK3pin for supply. That's it.
(version 1.0 had an OPA656 and a second OPamp for further amplification).
Git
Layout
- 22.5mm x 37.75mm
- Supply: needs +/- 5V from extern (PSK-3pin)
- Output: SMA
- LEDs: None
Casing
None.