meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
3d-druck:start [2023/01/21 07:13] – [Cura profile] Vier Cura-Profile kmk3d-druck:start [2024/03/29 01:18] (current) – [Archive of cura profiles] kmk
Line 1: Line 1:
 ====== 3D-Printing ====== ====== 3D-Printing ======
 +[[.:3d-catalog:start]]
 +
 To produce gorgeous objects with the 3D printer on the 3rd floor, you need to install a [[WP>Slicer (3D printing)|slicer]] on your desktop or laptop. The recommended slicer is [[https://ultimaker.com/de/software/ultimaker-cura|cura]].((If you don't like cura, feel free to pioneer an alternative like [[https://slic3r.org/|Slic3r]], [[https://www.prusa3d.com/page/prusaslicer_424/|PrusaSlicer]] or [[https://github.com/supermerill/SuperSlicer|SuperSlicer]]. )) To produce gorgeous objects with the 3D printer on the 3rd floor, you need to install a [[WP>Slicer (3D printing)|slicer]] on your desktop or laptop. The recommended slicer is [[https://ultimaker.com/de/software/ultimaker-cura|cura]].((If you don't like cura, feel free to pioneer an alternative like [[https://slic3r.org/|Slic3r]], [[https://www.prusa3d.com/page/prusaslicer_424/|PrusaSlicer]] or [[https://github.com/supermerill/SuperSlicer|SuperSlicer]]. ))
  
Line 60: Line 62:
   * select:   * select:
     - 'OctoPrintConnection' -- necessary to talk to the printer via network     - 'OctoPrintConnection' -- necessary to talk to the printer via network
-    - 'Printjob Naming' -- to prefix your job file with your name+    - 'Printjob Naming' -- to automatically prefix your job file with your name
     - In cura v4.18 or lower: there are plugins to import native 3D model files from your favourite CAD suite((From cura v5.0 onward the various CAD integration plugins got retracted by its author. This may or may not be connected to the [[https://3dprint.com/291216/ultimaker-stratasys-and-makerbot-ultimaker-buys-the-death-star-analysis/|merger of Ultimaker with the stratasys owned Makerbot]].)):     - In cura v4.18 or lower: there are plugins to import native 3D model files from your favourite CAD suite((From cura v5.0 onward the various CAD integration plugins got retracted by its author. This may or may not be connected to the [[https://3dprint.com/291216/ultimaker-stratasys-and-makerbot-ultimaker-buys-the-death-star-analysis/|merger of Ultimaker with the stratasys owned Makerbot]].)):
       * 'Inventor integration'       * 'Inventor integration'
Line 68: Line 70:
     - 'Settings Guide' -- provides more verbose pop-up help     - 'Settings Guide' -- provides more verbose pop-up help
     - Sidebar GUI -- transform the slightly annoying floating settings menu into a regular sidebar     - Sidebar GUI -- transform the slightly annoying floating settings menu into a regular sidebar
-    - ++ 
  
 Configure the printjob naming plugin to put your name in front of the job name:   Configure the printjob naming plugin to put your name in front of the job name:  
Line 80: Line 81:
 ===== Cura profile ===== ===== Cura profile =====
 Cura maintains 'profiles' which are essentially set of slicing parameters. The application comes with several default profiles suggestively named "extra fine", "fine", "normal",..., "extra coarse". While the parameters of these profiles are reasonable, it is recommended to add our own blends, which reflect the current state of the leapfrog. Cura maintains 'profiles' which are essentially set of slicing parameters. The application comes with several default profiles suggestively named "extra fine", "fine", "normal",..., "extra coarse". While the parameters of these profiles are reasonable, it is recommended to add our own blends, which reflect the current state of the leapfrog.
-  - download: +  - download localized profiles: 
     * {{ :3d-druck:leapfrog_fein_20januar2023.curaprofile |}} -- 20% infill; outer layer height = 0.1 mm; infill layer height = 0.4 mm     * {{ :3d-druck:leapfrog_fein_20januar2023.curaprofile |}} -- 20% infill; outer layer height = 0.1 mm; infill layer height = 0.4 mm
     * {{ :3d-druck:leapfrog_grob_20januar2023.curaprofile |}} -- 20% infill; outer layer height = 0.3 mm; infill layer height = 0.9 mm     * {{ :3d-druck:leapfrog_grob_20januar2023.curaprofile |}} -- 20% infill; outer layer height = 0.3 mm; infill layer height = 0.9 mm
-    * {{ :3d-druck:leapfrog_voll-fein_20januar2023.curaprofile |}} -- 99% infill((at 100% infill cura treats the whole volume as "wall". 99% infill allows to differentiate between wall and infill)); outer layer height = 0.1 mm; infill layer height = 0.4 mm+    * {{ :3d-druck:leapfrog_voll-fein_20januar2023.curaprofile |}} -- 99% infill((At 100% infill cura treats the whole volume as "wall". 99% infill allows the profile to differentiate between wall and infill)); outer layer height = 0.1 mm; infill layer height = 0.4 mm
     * {{ :3d-druck:leapfrog_voll-grob_20januar2023.curaprofile |}}  -- 99% infill; outer layer height = 0.3 mm; infill layer height = 0.9 mm     * {{ :3d-druck:leapfrog_voll-grob_20januar2023.curaprofile |}}  -- 99% infill; outer layer height = 0.3 mm; infill layer height = 0.9 mm
-  - Import the profiles to cura:+  - import the profiles to cura:
     * go to //Preferences// → //Cura_settings...//     * go to //Preferences// → //Cura_settings...//
     * choose //Profiles// in left tab → button //Import//     * choose //Profiles// in left tab → button //Import//
Line 92: Line 93:
     * select the imported profile in the list     * select the imported profile in the list
     * click the button //activate// to actually use the profile for the next slicing. Alternatively, you can choose the profile from the drop-down menu at the top of the //Print settings// dialogue.     * click the button //activate// to actually use the profile for the next slicing. Alternatively, you can choose the profile from the drop-down menu at the top of the //Print settings// dialogue.
-Keep in mind, that these profiles are meant as a starting point. Feel free to tweak the parameters to suit your needs even better. This is especially true for layer height and speed. With large prints every additional mm/s reduces the time to print significantly. Small models with delicate details benefit from slow nozzle movements. +These profiles will get you started. Feel free to tweak the parameters to suit your needs even better. This is especially true for layer height and speed. With large prints every additional mm/s reduces the time to print significantly. Small models with delicate details benefit from slow nozzle movements. 
  
-By default, cura only exposes a severely reduced set of parameter in the GUI. Use the three-horizontal-lines button next to the search field to switch to your preferred level of settings detail. +By default, cura only exposes a severely reduced set of parameters in the GUI. Use the three-horizontal-lines button next to the search field to switch to your preferred level of settings detail. 
  
 ===== Connect to the printer ===== ===== Connect to the printer =====
Line 110: Line 111:
   - click 'OK'   - click 'OK'
   - <del>click 'Request...' under 'API Key'</del>    - <del>click 'Request...' under 'API Key'</del> 
-     * API key request are currently not available. Copy ''F4223B8E2C1B486B9445ABB58D1431E0'' to the edit field instead. The API key is used by cura to authorize itself to the octoprint instance of the leapfrog printer. It lets you print directly from cura without the need to login on the leapfrog website.+     * API key requests are currently not available. Copy ''F4223B8E2C1B486B9445ABB58D1431E0'' to the edit field instead. The API key is used by cura to authorize itself to the octoprint instance of the leapfrog printer. It lets you print directly from cura without the need to login on the leapfrog website.
   - <del>in the web browser a new tab should have opened which asks you to allow API access → confirm</del>   - <del>in the web browser a new tab should have opened which asks you to allow API access → confirm</del>
   - <del>in cura, the API key should manifest itself as a string of obscured characters</del>   - <del>in cura, the API key should manifest itself as a string of obscured characters</del>
Line 124: Line 125:
  
 ===== Archive of cura profiles ===== ===== Archive of cura profiles =====
-{{filelist>.:*&style=list&direct=0&sort=ctime}}+{{filelist>media/3d-druck/*.curaprofile&style=list&direct=0&sort=ctime}}
  
 {{indexmenu_n>125}} {{indexmenu_n>125}}